Filter
Top Products
H
Monitoring
36 For assistance, please visit http://www.panasonic.com/phonehelp
Video monitor
This feature allows the unit to monitor the
image and sound of the room where the
compatible Panasonic unit (KX-THA12/
KX-THA16/KX-THA17) or the cordless
camera (KX-THA13) is located.
Important:
LBefore you start monitoring, confirm that
the camera lens of the monitored unit
has been adjusted to the correct angle.
LOnly 1 person can access to the
cordless camera at a time.
Monitoring the room
1 {MONITOR} (F5)
2 “Camera & Audio” i {SELECT}
3 Select the desired unit. i {SELECT}
LTo start/finish talking with the other
party, press {2WAY} .
4 Press {OFF} to stop monitoring.
Note:
LWhen {Call button} of the cordless
camera is pressed while monitoring the
cordless camera with this unit, {2WAY}
flashes on the display to notify you that
the cordless camera is paging you.
Press {2WAY} to answer the page.
Adjusting speaker volume
Press {^} or {V} while monitoring.
Taking a picture of the displayed image
while monitoring
Press {CAPTURE} when the desired
image is displayed.
LA title is assigned to the image and the
image is saved.
Note:
LTo view the image, see “Picture gallery”
on page 41.
When paged from the cordless
camera using the sensor (For
KX-THA13 users)
The unit can be paged from the cordless
camera when the camera sensor detects
motion and/or audio. Then you can answer
the page to monitor the live video from the
cordless camera.
And also, the cordless camera takes
pictures (a total of 4 pictures, default) at
the time of detection and stores them. You
can view the images stored in the cordless
camera using your unit, then select and
save the desired images into your unit.
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 35).
THA16.book Page 36 Thursday, March 9, 2006 6:43 PM