Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 61
Error messages/icons
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause & solution
Busy LThe called handset or base unit is in use.
LOther users are using the line(s). Wait until the line
button light or the line status icon goes out.
LPrivacy mode is on for the call you tried to join (page
34).
LThe handset or base unit you tried to copy phonebook
items to is in use.
LThe handset you are calling is too far from the base unit.
LThe handset user is monitoring a room using the
cordless camera.
Camera detect LThe cordless camera paged the unit, but nobody
answered the page. After you monitor the cordless
camera, it disappears from the display.
Denied
Turn access on at
device.
LThe monitor feature is turned off on the destination
handset or base unit and the room cannot be monitored
(page 35).
Error!! LThe unit’s registration or deregistration has failed. Move
this unit and the base unit away from the electrical
appliances and try again.
LThe handset or base unit user tried to send phonebook
items to you but there was an error. Have the other user
re-send the items to you (page 24).
Error!!
8 handsets have
already been
registered.
L8 handsets have already been registered to the base
unit. The deregistered handset number is still retained
in the base unit. To register an additional handset,
erase the unnecessary handset number using the base
unit. For more information, see the operating
instructions included with your base unit.
Failed LVideo phone feature is not permitted on the other
party’s unit.
LThe video connection failed and you will be returned to
voice call shortly. Wait until it returns to voice call.
LIf the “PC camera access” setting on the base unit is
set to “On”, you cannot use the video phone feature
during an intercom call.
THA16.book Page 61 Thursday, March 9, 2006 6:43 PM