Filter
Top Products
Introduction
For assistance, please visit http://www.panasonic.com/phonehelp 9
For best performance
Location/Noise
This unit communicates using radio
waves.
For maximum distance and noise-free
operation, we recommend the following:
LPlacing the product away from electrical
appliances.
LIf you use the unit near other electrical
appliances (microwave, wireless LAN
appliance, etc.), noise may be heard.
Move away from those appliances and
closer to the base unit.
LIf you use the unit near another cordless
phone’s base unit, noise may be heard.
Move away from the other cordless
phone’s base unit and closer to your
base unit.
Environment
LKeep the product away from electrical
noise generating devices, such as
fluorescent lamps and motors.
LThe product should be kept free from
excessive smoke, dust, high
temperature, and vibration.
LThe product should not be exposed to
direct sunlight.
LDo not place heavy objects on top of the
product.
LWhen you leave the product unused for
a long period of time, unplug the product
from the power outlet.
LThe product should be kept away from
heat sources such as heaters, kitchen
stoves, etc. It should not be placed in
rooms where the temperature is less
than 5 °C (41 °F) or greater than 40 °C
(104 °F), except when charging (page
11). Damp basements should also be
avoided.
LThe maximum calling distance may be
shortened when the product is used in
the following places: Near obstacles
such as hills, tunnels, underground, near
metal objects such as wire fences, etc.
LOperating near 2.4 GHz electrical
appliances may cause interference.
Move away from the electrical
appliances.
Routine care
LWipe the outer surface of the product
with a soft moist cloth. Do not use
benzine, thinner, or any abrasive
powder.
Conditions for using the unit’s
built-in camera
LThe unit’s built-in camera is intended for
indoor use only. Prolonged exposure to
direct sunlight or halogen light may
damage CMOS sensor.
LUse the unit’s built-in camera in a bright
place such as under daylight or a well-lit
room.
LDo not use the unit’s built-in camera in
the following places:
– near incandescent lamps.
– near any electrical appliance that
emits a strong radio signal.
– where the subject of the picture is
against a light source or in front of a
mirror.
LIn darker environments other than
daylight or in a well-lit room, the
smoothness of motion decreases in
order to keep the appropriate brightness
and sharpness of images. In such
environments, the smoothness of
motion may not increase/decrease
much even if you change the display
sharpness settings (page 29, 38).
LWhen using the unit’s built-in camera,
please take into consideration the rights
of others with regard to privacy.
THA16.book Page 9 Thursday, March 9, 2006 6:43 PM