Filter
Top Products
Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 49
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
LYou only need to program this setting
once, using either this unit, the handset,
or the base unit.
1 {MENU} (F6) i x i {SELECT}
2 “Set tel line” i {SELECT}
3 “Set dial mode” i {SELECT}
4 Select the desired setting. (Default:
“Tone”) i {SAVE} i {OFF}
Flash time
The flash time depends on your telephone
exchange or host PBX.
LYou only need to program this setting
once using either this unit, the handset,
or the base unit.
Important:
LThe setting should stay at 700 ms unless
pressing {FLASH} fails to pick up the
Call Waiting call.
1 {MENU} (F6) i x i {SELECT}
2 “Set tel line” i {SELECT}
3 “Set flash time” i {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default:
“700ms”) i {SAVE} i {OFF}
Note:
LIf the base unit is connected via a PBX,
certain PBX functions (call transferring,
etc.) may not work correctly. Consult
your PBX supplier for the correct setting.
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if k or l is not displayed on this
unit, or
–if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to “A”.
LYou only need to program this setting
once using either this unit, the handset,
or the base unit.
1 {MENU} (F6) i x i {SELECT}
2 “Set tel line” i {SELECT}
3 “Set line mode” i {SELECT}
4 Select the desired line.
5 Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}
Memory status
You can confirm the amount of unit’s
memory used for your images and songs.
LThe images and songs are stored in the
same memory (in addition to the preset
images and songs). A maximum of 98
images and a maximum of 20 songs can
be stored. The number of stored images
and songs may decrease depending on
the size of each file, the number of files,
etc.
Memory usage
1 {MENU} (F6) i x i {SELECT}
2 “Memory status” i {SELECT}
LThe memory status is displayed.
3 {OFF}
File type Quantity Memory
used
Image 1 image 1 %
Song 30 seconds 4 %
THA16.book Page 49 Thursday, March 9, 2006 6:43 PM