Filter
Top Products
Useful Information
64 For assistance, please visit http://www.panasonic.com/phonehelp
Printing error icons
If the unit detects a problem when you try to print images, an error icon is displayed.
Error icon Cause & solution
Radio frequency connect error
LThe unit has lost communication with the base unit. Move closer to
the base unit, and try again.
LConfirm that the base unit’s AC adaptor is plugged in.
LRaise the base unit antennas.
LThe unit’s registration may have been canceled. Re-register the
unit (page 17).
LThe resources available for wireless communication (making or
answering calls with a handset, monitoring camera images from a
computer, etc.) are limited. Therefore, depending on the
combination of wireless features being conducted at the same time,
your desired operation may not be possible. Wait for other users to
finish and try again.
PC connect error
LMake sure that you have registered the unit using the MULTI TALK
V Printing Utility. Refer to the “Installation Guide for MULTI TALK V
Software” included with your base unit.
LMake sure that you have selected the computer properly (page 58).
LMake sure that the computer is turned on.
LIf you are using “Wake on LAN” (WOL), confirm that the wake up
time is appropriate for your computer. Set a longer time (page 58).
LIf you change the computer’s network interface (LAN card, wireless
network card, USB adaptor, etc.), you must select the computer
again before you can print again (page 58).
Process error
LData traffic is heavy. Try again later.
THA16.book Page 64 Thursday, March 9, 2006 6:43 PM