Filter
Top Products
Programmable Settings
42 For assistance, please visit http://www.panasonic.com/phonehelp
Ringer settings
Important:
LMany of the following features can be
programmed using the MULTI TALK V
USB Utility. Refer to the help section of
the MULTI TALK V USB Utility
application for more information. For
software installation details, refer to the
“Installation Guide for MULTI TALK V
Software” included with your base unit.
Ringer volume
1 {MENU} (F6) i s i {SELECT}
2 “Ringer volume” i {SELECT}
3 Select the desired line.
4 Select the desired volume. (Default:
High)
LTo turn the ringer off, press {V}
repeatedly until “Off ?” is displayed.
5 {SAVE} i {OFF}
Note:
LWhen the ringer volume is set to off for a
line, the unit does not ring for outside
calls received on that line.
Ringer tone
You can change the ringer tone heard
when an outside call is received.
Important:
LYou can record songs for the ringer tone
from an audio device (page 43).
LYou can copy songs (in WAV file format
using a computer) to be used for the
ringer tone. Refer to the help section of
the MULTI TALK V USB Utility
application for more information.
1 {MENU} (F6) i s i {SELECT}
2 “Ringer tone” i {SELECT}
3 Select the desired line.
4 Select the desired item. (Default: Line
1: “Tone 1”, Line 2: “Tone 2”) i
{SAVE} i {OFF}
Note:
LIf you subscribe to a distinctive ring
service (such as IDENTA-RING), select
a tone (tone 1 to 3) for the ringer tone. If
you select a melody or a song, you
cannot distinguish lines by their ringers.
LIf you select a melody or a song for the
ringer tone, the ringer continues to
sound for several seconds if:
– the caller hangs up before you answer
the call.
– another person answers the call using
another phone connected on the
same line.
LThe preset song “Melody 1” in this
product is used with the permission of ©
2005 Speed Crazy.
LThe preset songs “Tone 4”, “Tone 5”,
and “Melody 2” in this product are used
with the permission of © 2005 M-
ZoNE Co., Ltd.
THA16.book Page 42 Thursday, March 9, 2006 6:43 PM