Filter
Top Products
H
Monitoring
For assistance, please visit http://www.panasonic.com/phonehelp 35
Monitoring feature
This feature allows you to monitor the
room where this or another unit is located.
The monitored unit does not ring, allowing
you to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room (“Audio monitor”,
page 35)
– the image and sound of a room (“Video
monitor”, page 36).
Enabling monitoring access
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
–“Permit”: allows the unit to be
monitored.
–“Deny”: denies access from other units.
1 {MENU} (F6) i x i {SELECT}
2 “Monitor access” i {SELECT}
3 Select the desired setting. (Default:
“Deny”) i {SAVE} i {OFF}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
Monitoring audio in the room
1 {MONITOR} (F5)
2 “Audio only” i {SELECT}
3 Select the desired unit. i {SELECT}
LYou can listen to the audio in the
room through the destination unit.
4 Press {OFF} to stop monitoring.
Note:
LTo start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 35).
THA16.book Page 35 Thursday, March 9, 2006 6:43 PM