Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 67
Phonebook
Caller ID
Problem Cause & solution
Copying stopped with an
item displayed.
LThe destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s} on the handset or {SP-PHONE}
on the base unit.
The displayed phonebook item was not copied to the
unit. Press {OFF}. Confirm that the destination unit is
not in use and try again.
Problem Cause & solution
The unit does not display
the caller’s name and/or
phone number.
LYou have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
LThe name display service may not be available in some
areas. Contact your telephone company for details.
LOther telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
LThe caller requested not to send caller information
(page 25).
LIf a call is being transferred to you, the caller information
is not displayed.
LWhen printing (page 59), the unit does not display caller
information until “Please wait” disappears from the
display. To view caller information, press {OFF}. The
unit stops printing.
The unit does not
announce the displayed
caller names.
LThe unit’s ringer volume is turned off. Adjust it (page
42).
LThe Talking Caller ID feature is turned off. Turn it on
(page 48).
The caller list/incoming
phone numbers are not
edited automatically.
LThe Caller ID number auto edit feature is turned off.
Turn it on and try again (page 48).
LYou need to call back the edited number to activate
Caller ID number auto edit.
I cannot dial the phone
number edited in the
caller list.
LThe phone number you dialed might have an incorrect
edited pattern (for example, the long distance “1” or the
area code is missing). Edit the phone number with
another pattern (page 27).
THA16.book Page 67 Thursday, March 9, 2006 6:43 PM