6. Focus and Brightness (Exposure) Settings
146
When selecting [ ]
You can set the focus position precisely by enlarging the screen.
•
The focus position cannot be set at the edge of the screen.
1 Select [ ] and press 4.
2 Press 3/4/2/1 to set the focus position and then press [MENU/SET].
•
The assist screen for setting the focus position is displayed in an enlarged size.
3 Move [_] to the focus position with 3/4/2/1.
•
Pressing [DISP.] will bring the focus position back to the
center of the assist screen.
∫ Changing the display of the assist screen
Each time the rear dial is pressed, an enlarged display switches between a windowed
screen display and a full screen display.
•
If the rear dial is rotated, the display can be enlarged/reduced up to approximately 3 to 6 times
when the enlarged display is in a windowed display or up to approximately 3 to 10 times when
the enlarged display is in a full screen display. The rear dial enlarges/reduces the size at a rate
of 1 time.