Filter
Top Products
4. Recording Modes
92
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
•
The exposure meter is displayed, and the aperture and shutter speed are changed to give
a suitable exposure.
• The exposure meter is not displayed in Creative Video Mode.
• In the following cases, suitable exposure cannot be set.
–When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
–When recording using the flash
–In Preview Mode (P91)
•In Program AE Mode, Program Shift can be canceled by pressing the function button to which
[One Push AE] has been set.
Easily set aperture/shutter speed for suitable exposure (One Push AE)
How to tell if the exposure is not adequate
•
If the aperture values and shutter speed blink red A when
the shutter button is pressed halfway.
•If the Manual Exposure Assistance is anything other than
when in Manual Exposure mode.
For more details on Manual Exposure Assistance, refer to
P89.
1 Set a function button to [One Push AE]. (P44)
•
The following step is an example in which [One Push AE] is assigned to [Fn1].
2 (When exposure is not adequate)
Press [Fn1].
00
-
3
-
3
2
00
4000400040004.04.04.0
989898
A
00
-
3
-
3
2
00
4000400040004.04.04.0
989898
2
00
SSSSSS
F
15 250
2.8 4.0 5.6
1256030
6060602.8
0
989898