Filter
Top Products
319
14.
Others
Optional accessories
After attaching the flash (DMW-FL360L, DMW-FL580L: optional), the effective range will
be increased when compared to the camera’s built in flash.
Preparations:
•
Turn off the camera and close the built-in flash.
∫ Using the dedicated flash (DMW-FL360L: optional)
1 Attach the dedicated flash to the hot shoe and then turn on the camera and the
dedicated flash.
2 Select the menu.
3 Press 3/4 to select [Flash Mode] and then press [MENU/SET].
4 Press 3/4 to select an item and then press [MENU/SET].
•
While the external flash is connected, the following icons are displayed.
External Flash (optional)
Removing the Hot Shoe Cover
The camera comes with a hot shoe cover attached to the hot shoe.
Remove the hot shoe cover by pulling it in the
direction indicated by arrow
2
while pressing it in
the direction indicated by arrow
1
.
•When the hot shoe is not in use, make sure to attach the hot shoe
cover.
•Please be careful not to lose the hot shoe cover.
•Keep the Hot Shoe Cover out of reach of children to prevent
swallowing.
> [Rec] > [Flash]
: External flash Forced ON
: External flash Slow Sync.
Œ: External flash Forced OFF
•Signal-flashing with wireless flashes is also disabled.
MENU