Filter
Top Products
297
12. Using the Wi-Fi function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu.
•
Refer to P283 for details.
•For details on how to enter characters, refer to “Entering Text” section on P55.
•If you are using the PC with standard settings, you do not need to change the workgroup.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
[LUMIX CLUB]
Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
Exit the menu after it is set.
[Restore to Default]:
Restores the default state.
Confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.
[Device Name]
You can change the name of this unit.
1 Press [DISP.].
2 Enter the desired device name.
•
For details on how to enter characters, refer to “Entering Text”
section on P55.
• A maximum of 32 characters can be entered.
[NFC Operation]
Configures the settings for the NFC function.
[ON]:
NFC function is worked.
[OFF]
MENU