Filter
Top Products
12. Using the Wi-Fi function
264
∫ Start recording location information
Operate the smartphone.
∫ Finish recording the location information
Operate the smartphone.
∫ Sending and writing location information
1 Connect to a smartphone. (P255)
2 Operate the smartphone.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
•On the smartphone, you can set the acquisition interval of location information and check the
transfer status of location information.
Refer to [Help] in the “Image App” menu for details.
•(When using “Image App” for iOS)
If you press the Home or On/Off button of the smartphone while location information is being
recorded, the recording will stop.
Not available in these cases:
•
The smartphone may fail to acquire location information in China and the border area in the
neighbouring countries of China.
(As of June 2014)
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
1 Select [ ].
2 Select [Geotagging].
3 Select [ ].
•
Follow the on-screen messages to operate the smartphone.
• Location information is not written onto the images recorded when [Rec Format] is set
to [AVCHD].
• When the card in the camera lacks sufficient free space, writing location information
may not be possible.
• Once the location information is sent to the camera, you can also write it on images by
performing [Location Logging] in the [Playback] menu.