Filter
Top Products
8. Functions Customized for Various Subjects and Purposes
194
•If there are any white saturated areas, we recommend compensating the exposure towards
negative (P159) referring to the histogram (P66) and then taking the picture. It may result in a
better quality picture.
•Displayed zebra patterns will not be recorded.
•If you assign [Zebra Pattern] to [Fn Button Set] (P44) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1] → [Zebra 2] → [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] → [OFF], allowing
you to switch the setting quickly.
Applicable modes:
You can display the recording screen in black and white. This function is convenient when
a black and white screen will make it easier to set focus with Manual Focus.
Settings: [ON]/[OFF]
•
Recorded images will not be affected.
Recording while monitoring camera images
When using the HDMI output, you can take pictures while
monitoring the camera image on a TV, etc.
Refer to P301 on how to connect with TV by using HDMI
micro cable.
•
The camera image is not output to the TV during motion picture
recording.
∫ Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
(P53) in [TV Connection] on the [Setup] menu.
•
When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in
windowed mode.
•[Aspect Ratio] in the [Rec] menu is fixed to [16:9].
•Electronic sounds and electronic shutter sounds are muted.
•If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
•The scene selection screen in Scene Guide Mode is not output through the HDMI connection.
Displaying the recording screen in black and white ([Monochrome Live View])
> [Custom] > [Monochrome Live View]
[ON]:
The camera display is output as is.
[OFF]:
Only images are output.
MENU