Filter
Top Products
12. Using the Wi-Fi function
268
Displaying pictures on a TV
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P288)
3 Select a device you want to connect.
•
When the connection is established, the screen is displayed.
4 Take or play back pictures on this unit.
•
To change the setting or disconnect, press [Wi-Fi]. (P252)
•When a TV is connected to this unit, the TV screen may temporarily return to the status before
the connection. Pictures are displayed again when you take or play back pictures.
•[Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.
•During the multi/calendar playback, pictures displayed on the screen of this unit are not
displayed on TV.
You can display pictures on a TV that supports the
Digital Media Renderer (DMR) function of the DLNA
standard.
•
If you display pictures using the Wi-Fi function, they
cannot be output in 4K resolution. To output them in 4K
resolution, connect the camera and the TV with an HDMI
micro cable. (P301)
Preparations:
Set the TV to DLNA waiting mode.
•
Read the operating instructions for your TV.
> [New Connection] > [Playback on TV]
Wi-Fi