Panasonic DMC-FZ1000 Digital Camera User Manual


 
259
12. Using the Wi-Fi function
Using the NFC “Near Field Communication” function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone.
1 Launch “Image App” on the smartphone.
2 While [ ] is displayed on the screen of
the smartphone, touch the smartphone to
[ ] of the camera.
3 When the connection confirmation screen
is displayed on the camera, select [Yes].
4 Touch the smartphone to [ ] of the
camera again.
Steps 3
through 4 are not required from the
second time on.
It may take time to complete the connection.
When the smartphone has connected, an image
of this camera will be displayed on the
smartphone.
The connected smartphone is registered to this
camera.
If a connection attempt by touching fails, restart
the “Image App”, and then display the screen in step
1 again.
If a connection is established during single picture playback, the picture will be transferred
to the smartphone. (P262)
Connecting to a smartphone/tablet by using the NFC function
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
Preparation:
(On the camera)
Set [NFC Operation] to [ON]. (P297)
(On your smartphone)
Check that your smartphone is a compatible
model.
Turn on the Wi-Fi function.
Install the “Image App” in advance. (P254)