Others
Optional accessories
VQT5B76
- 207 -
AC adaptor (optional)/DC coupler (optional)
The AC adaptor (optional) can only be used with the designated Panasonic DC
coupler (optional). The AC adaptor (optional) cannot be used by itself.
Preparations: Turn this unit off and confirm that the lens barrel is retracted.
Pull open the card/battery door and the DC coupler cover
Insert the DC coupler into this unit
• Insert by pushing the center of the DC coupler.
• Press on the DC coupler until it is locked by lever.
Pull out the cable through the opening as shown in the
illustration and then close the card/battery door
• Be careful not to catch the cable when closing the card/battery door.
Plug the AC adaptor into an electrical outlet
Connect the AC adaptor to the [DC IN] socket of the DC
coupler
DC coupler
cover
Card/battery door
DC coupler
AC cable
Lever
AC adaptor
●
Always use a genuine Panasonic AC adaptor (optional).
●
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
●
If the AC adaptor and DC coupler are not necessary, then remove them from the
digital camera. Also, please keep the DC coupler cover closed.
●
Also read the operating instructions for the AC adaptor and DC coupler.