Filter
Top Products
141
VQT2S30
Advanced (Recording pictures)
• LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD].
(P42)
• The recording area indicated is a guide line.
[LVF/LCD AUTO]
It will switch automatically to viewfinder display when an eye or
object gets near the viewfinder using an eye sensor. It will return
to LCD monitor display when it goes away.
[OFF]/[ON]
[¦
BUTTON SWITCH]
It is possible to set how the [¦] button to toggle to Intelligent
Auto Mode will operate.
[SINGLE PRESS]:
It will switch to Intelligent Auto Mode by pressing [¦].
[PRESS AND HOLD]:
It will switch to Intelligent Auto Mode by pressing [¦] for a while.
[ BUTTON]
Enables/disables the motion picture button.
[OFF]/[ON]
[ REC AREA]
This changes the angle of view during motion picture recording
and still picture recording.
[!]
(Picture)/[ ] (Motion picture)
[REMAINING DISP.]
This will switch display between the number of recordable
pictures and available recording time.
[REMAINING SHOTS]:
This will display the number of recordable pictures for still
pictures.
[REMAINING TIME]:
This will display the available recording time for motion pictures.
[TOUCH Q.MENU]
Enables/disables the Quick Menu during the touch operation.
[OFF]: Touch Quick Menu icon is not displayed on the screen,
and the Touch Quick Menu is disabled.
[ON]: Touch Quick Menu icon is displayed on the screen,
and the setting by the Touch Quick Menu is enabled
when touched the icon.
DMC-G2KPP-VQT2S30_eng.book 141 ページ ２０１０年４月１３日 火曜日 午後９時２０分