Filter
Top Products
VQT2S30
166
Connecting to other equipment
∫ Usable functions
Operate with the remote control for the TV.
Note
•
Operation icons are hidden by pressing [RETURN], or if no operation is performed for a while
when the operation icons are displayed. Operation icons are displayed when one of the
following buttons is pressed while the operation icons are not displayed.
– 3/4/2/1, [OK], [SUB MENU], [RETURN], Red button, Green button, Yellow button
• It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• When the [VIERA Link] (P38) of this unit is set to [ON], operation using the button on this unit
will be limited.
• VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
• If you are not using VIERA Link, set [VIERA Link] (P38) to [OFF].
Multi Playback
This is displayed initially when using the VIERA Link.
3/4/2/1: Select the image.
[OK]: Go to one screen display.
Red button: Switch the types of data to play back.
[SUB MENU]:
Display the Playback Mode selection screen.
•
The type of data for playback changes in the order of [ALL] >
[] > [] > [] > [ALL].
• Either the [NORMAL PLAY], [SLIDE SHOW], [CATEGORY
PLAY], [FAVORITE PLAY] or the [CALENDAR] can be selected
in the Playback Mode selection screen when [ALL] is selected.
One screen display
Select the image while in Multi Playback, and then press [OK].
2/1: Go to previous/next image.
3: Display the recording information.
4: Return to Multi Playback.
[OK]: Playback the motion picture (when motion
picture is selected).
Playback the audio (when picture with audio
is selected).
Red button: Start the Slide Show.
[SUB MENU]:
Go to Slide Show setting screen.
•
During Motion Picture Playback, use 2/1 for back/forward and
4 to stop playback.
Slide show
Press Red button during one screen display.
2/1:
Go to previous/next image (when Slide Show
is paused/when motion picture is played back).
4: Finish the Slide Show and return to one
screen display.
[OK]: Pause.
[SUB MENU]:
Go to Slide Show setting screen.
•
To playback the audio of the motion pictures, set the [SOUND] in
the Slide Show setting screen to [AUTO] or [AUDIO].
A Operation icon
A
A
DMC-G2KPP-VQT2S30_eng.book 166 ページ ２０１０年４月１３日 火曜日 午後９時２０分