Filter
Top Products
VQT2S30
46
Basic
[REC] Mode: ñ
Basic
Taking Pictures using the Automatic Function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
•
The following functions are activated automatically.
– Scene Detection/[RED-EYE REMOVAL]/Face Detection/Intelligent ISO sensitivity control/
[I.EXPOSURE]/[LONG SHTR NR]/Quick AF/[FOCUS PRIORITY]/Backlight Compensation/
[I.RESOLUTION]
Press [¦] A.
• [¦] button will light up when it is switched to Intelligent Auto Mode.
[
¦] button is turned off during recording to prevent the light reflecting on glass or
similar, but this is not a malfunction.
• [¦] button is turned off when it is pressed again, and it will be set to the [REC] Modes
selected by the mode dial.
• When the mode dial is set to [ ], motion pictures will reflect the setting of Intelligent
Auto Mode. (P112)
• AF Mode will be set to [š] regardless of the setting of the auto focus mode dial.
Set the focus mode lever to [AFS] or [AFC].
• Refer to
P52
for [AFS] and [AFC].
• The status indicator 3 lights when you turn this
unit on 2. (1: Shutter button)
Press the shutter button halfway to focus.
• The focus indication 1 (green) lights when the subject
is focused.
• The AF area 2 is displayed around the subject’s face
by the Face Detection Function. In other cases, it is
displayed at the point on the subject which is in focus.
• The focus indication blinks when the subject is not
focused. In this case, a picture is not taken. Press the
shutter button halfway to focus on the subject again.
•
The focus range is different depending on the lens used.
– When the 14–42 mm/F3.5–5.6 lens included in
DMC-G2K is used: 0.3 m (0.99 feet) to
¶
ON
OFF
MF
AFC
AFS
2
1
DMC-G2KPP-VQT2S30_eng.book 46 ページ ２０１０年４月１３日 火曜日 午後９時２０分