Filter
Top Products
179
VQT2S30
Others
Using the Remote Shutter (optional)
If you use the remote shutter (DMW-RSL1; optional), you can avoid jitter (camera shake)
when using a tripod and you can keep the shutter pressed fully when taking pictures with
[B] (Bulb) or Burst Mode. The remote shutter works similar to the shutter button on the
camera.
Firmly connect the remote shutter to
the [REMOTE] socket on the camera as
far as it will go.
Take a picture.
1 Press the button lightly to press halfway.
2 Press the button fully to take the picture.
(Press it as far as it will go.)
∫ About [LOCK] on the remote shutter
•
You can keep the shutter button pressed fully. This is
effective when taking pictures with Burst Mode (P73) or
in [B] (Bulb) (P96).
• While pressing the shutter button fully, slide it to the
[LOCK] side.
• Slide it to the other side to cancel [LOCK].
Note
•
Do not use any other remote shutters except DMW-RSL1 (optional).
• You cannot operate the camera with the remote shutter in the following cases.
– When the Sleep Mode is canceled
• Record with Motion Picture P Mode (P115) when using for motion picture recording. Motion
picture recording can be started/stopped with the remote shutter.
• The remote shutter cannot be used while the stereo microphone (DMW-MS1; optional) is in
use.
REMOTE
MIC
DMC-G2KPP-VQT2S30_eng.book 179 ページ ２０１０年４月１３日 火曜日 午後９時２０分