Panasonic DMC-G2K Digital Camera User Manual


 
93
VQT2S30
Advanced (Recording pictures)
It will take pictures changing the type of film in accordance with the setting every time the
shutter button is pressed. (Up to 3 pictures)
Touch [2]/[1] to select [MULTI FILM].
Select [MULTI FILM 1], [MULTI FILM 2], or
[MULTI FILM 3], and then touch [2]/[1] to
select the film to be set for each.
[OFF] can be selected only for [MULTI FILM 3].
Touch [SET].
You can also press the shutter button halfway to set.
Focus on the subject and take a picture.
It will continuously take pictures by keeping the shutter button pressed when it is set to
Burst Mode. (Up to 3 pictures)
When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [ ] even if it is set to [ ].)
Multi film indication ([ ]) displayed on the screen will flash until all pictures of preset
amount are taken.
Note
[STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
White Balance Bracket will be disabled when the Multi Film Bracket is set.
Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
Multi Film Bracket
DMC-G2KPP-VQT2S30_eng.book 93 ページ 2010年4月13日 火曜日 午後9時20分