Filter
Top Products
VQT2S30
196
Others
• Is the flash closed?
> Slide the [ OPEN] lever to open the flash. (P66)
• The flash is activated 2 times. The interval between the first and second flash is longer when
Red-Eye Reduction (P68) is set so the subject should not move until the second flash is
activated.
• The LCD monitor turns off when [AUTO LCD OFF] (P36) is selected for the [ECONOMY] Mode.
[This does not happen when using the AC adaptor (P181).]
• It will switch to viewfinder display if there is hand or object near the eye sensor. (P42)
> Adjust the brightness of the LCD monitor/viewfinder to a proper level. (P35)
• [POWER LCD] is activated. (P36)
• This occurs due to the aperture of the lens changing when the shutter button is pressed
half-way, or when the brightness of the subject changes. This is not a malfunction.
• Does the picture appear on the viewfinder?
> Press [LVF/LCD] to switch to LCD monitor display. (P42)
• Is the LCD monitor switched off?
> Switch the display by pressing [DISPLAY]. (P63)
• Is the [EXPO. SETTINGS] set to [SWITCH BY PRESSING THE LVF/LCD BUTTON]? (P140)
• It is only displayed on the LCD monitor when the camera is connected to a PC or printer.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the LCD monitor.
Flash
The flash is not activated.
The flash is activated 2 times.
LCD monitor/Viewfinder
The LCD monitor turns off although the camera is turned on.
The LCD monitor/Viewfinder is too bright or dark.
It may flicker for an instant or the brightness of the screen may change significantly
for an instant.
The picture is not displayed on the LCD monitor.
LCD monitor and viewfinder do not switch when [LVF/LCD] is pressed.
Black, red, blue and green dots appear on the LCD monitor.
Noise appears on the LCD monitor.
DMC-G2KPP-VQT2S30_eng.book 196 ページ ２０１０年４月１３日 火曜日 午後９時２０分