Filter
Top Products
73
VQT2S30
Advanced (Recording pictures)
• In the Quick Menu (P34) while in button operation, if set to [ ] (LCD monitor style), exposure
compensation can be set with 3/4 after selecting to display exposure compensation with
2/1 or the rear dial.
• In the Quick Menu (P34) while in button operation, if set to [ ] (viewfinder style), after
selecting the Exposure Compensation display using the rear dial or 2/1, pressing the rear dial
or [MENU/SET] will allow you to compensate the exposure with the rear dial or 2/1.
[REC] Mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Set the drive mode lever to [ ].
Focus on the subject and take a picture.
A When Burst Mode is set to high speed [H].
• Hold down the shutter button fully to activate the
Burst Mode.
∫ Changing the burst speed
1 Select [BURST RATE] in the [REC] Mode menu. (P32)
2 Press 3/4 to select the burst speed and then press
[MENU/SET].
3 Press [MENU/SET] to close the menu.
•
You can also press the shutter button halfway to close the menu.
¢1 Number of recordable pictures
¢2 Pictures can be taken until the capacity of the card becomes full. However the burst speed
will become slower halfway. The exact timing of this depends on the aspect ratio, the picture
size, the setting for the quality and the type of card used.
[H]
(High speed)
[M]
(Middle speed)
[L]
(Low speed)
Burst speed (pictures/second) 3.2 2.6 2
Live View during Burst Mode None Available Available
¢
1
With RAW files
4 to 7
¢2
Without RAW files
Depends on the remaining capacity of the card
¢2
A
DMC-G2KPP-VQT2S30_eng.book 73 ページ ２０１０年４月１３日 火曜日 午後９時２０分