175
VQT2S30
Connecting to other equipment
Select and set the items both on the screen in step 2 of the
“Selecting a single picture and printing it” and in step
3 of the
“Selecting multiple pictures and printing them” procedures.
•
When you want to print pictures on a paper size or a layout which is
not supported by the camera, set [PAPER SIZE] or [PAGE LAYOUT]
to [{] and then set the paper size or the layout on the printer. (For
details, refer to the operating instructions of the printer.)
• When [PRINT SET (DPOF)] has been selected, the [PRINT WITH DATE] and
[NUM. OF PRINTS] items are not displayed.
• If the printer does not support date printing, the date cannot be printed on the picture.
• Since the printer’s settings may take precedence over the print with date setting, check the
printer’s print with date setting as well.
• When printing images with a text stamp, please remember to set print with date to [OFF] or the
date will print on top.
• In some printers, the picture date for pictures taken with the aspect ratio set to [ ] will be
printed vertically.
Note
When asking the photo shop to print the pictures
• By stamping the date using [TEXT STAMP] (P150) or setting date printing at the time of the
[PRINT SET] (P159) setting before going to a photo shop, the dates can be printed at the photo
shop.
You can set the number of prints up to 999.
•
You can also use the rear dial to set.
Print Settings
[PRINT WITH DATE]
Item Description of settings
[OFF] Date is not printed.
[ON] Date is printed.
[NUM. OF PRINTS]
OFF
1
CANCEL
SELECT
PRINT START
PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE
PAGE LAYOUT
MULTI SELECT
EXIT
MENU
DMC-G2KPP-VQT2S30_eng.book 175 ページ 2010年4月13日 火曜日 午後9時20分