Filter
Top Products
VQT2S30
18
Before Use
About the Lens
This unit can use the dedicated lenses compatible with the Micro Four Thirds™ System
lens mount specification (Micro Four Thirds mount).
Select a lens that matches the scene being recorded and your use of the pictures.
∫ “Micro Four Thirds Mount”
This is the lens mount standard for the
“Micro Four Thirds System”.
This was newly developed as an
interchangeable lens mount dedicated for
digital cameras.
∫ About the functions of your lens
•
Depending on the type of lens, you may not be able to use some functions such as the
Direction Detection function (P41), [STABILIZER] (P129), Quick AF (P137) and Continuous AF
(P137).
• The available flash range etc. differs depending on the aperture value of the lens you are using.
• Take some test pictures with the lens you are using.
• Lens with the Four Thirds™ mount
specification can be used by using the mount
adaptor (DMW-MA1; optional). Because of its
structure, Micro Four Thirds mount
specification lenses cannot be used on the
Four Thirds mount specification cameras. It
can only be used on the Micro Four Thirds
mount specification cameras.
• When you use the M mount adaptor or R mount adaptor (DMW-MA2M, DMW-MA3R; optional),
you can use Leica M Mount or Leica R Mount interchangeable lenses.
– For certain lenses, the actual distance at which the subject is in focus may differ slightly from
the rated distance.
– When using a Leica lens mount adaptor, set [SHOOT W/O LENS] (P143) to [ON].
• The focal distance of the employed lens is effectively doubled. (A 50 mm lens is equivalent to a
100 mm lens.)
DMC-G2KPP-VQT2S30_eng.book 18 ページ ２０１０年４月１３日 火曜日 午後９時２０分