Filter
Top Products
VQT2S30
38
Preparation
• Interlace method/progressive method
i= interlace scanning is scanning the screen with half of the effective scanning lines every 1/60
seconds, where p= progressive scanning is a high density image signal that is scanning the
screen with all the effective scanning lines every 1/60 seconds.
The [HDMI] terminal on this unit is compatible with high-definition output [1080i]. It is necessary
to have a compatible TV to enjoy progressive and high-definition images.
• If the images are not output on the TV when the setting is [AUTO], match with the image format
your TV can display, and select the number of effective scanning lines. (Please read the
operating instructions for the TV.)
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P163 for details.
• This will work when the HDMI mini cable (optional) is connected.
• Refer to P165 for details.
• Calibration is not done if correct position is not touched. Touch the [i] mark again.
[VIERA Link]
Setup so this unit can be controlled by the remote control of the
VIERA equipment by automatically coupling this unit with the
VIERA Link compatible equipment using HDMI mini cable
(optional).
[OFF]: Operation is performed with the buttons on this unit.
[ON]: Remote control operation of the VIERA Link
compatible equipment is enabled. (Not all operations
are possible)
Button operation of the main unit will be limited.
} [SCENE MENU]
Set the screen that is displayed when the mode dial is set to ,
, , , and .
[OFF]: The recording screen in the currently selected
advanced Scene Mode (P98) or Scene Mode (P103)
appears.
[AUTO]: The advanced Scene Mode or Scene Mode menu
screen appears.
[CALIBRATION]
Adjust the position of the touch panel if a different thing gets
selected from what you touched or touch operation does not
respond.
1 Press [MENU/SET].
2 Touch the orange [r] mark
displayed on the screen in order
with the stylus pen (supplied)
(5 places).
•
A message is displayed once the
position is set.
3 Press [MENU/SET] to finish.
DMC-G2KPP-VQT2S30_eng.book 38 ページ ２０１０年４月１３日 火曜日 午後９時２０分