Panasonic PV-GS32 Camcorder User Manual


 
23
Recording Mode
Finding the End of Recording
( Blank Search Function)
The [ ] indication and the One-Touch
Navigation icon appears during the Blank Search
.
• Approximately 1 second before the last recorded
scene, the Camcorder switches to the Recording
Pause Mode or the Still Playback Mode.
• If there is no blank left on the Cassette, the
Camcorder stops at the end of the tape.
The Blank Search Function aids you in locating the
end of the recording on the Cassette quickly (unused
part of the tape).
• Set to Tape Recording/Playback Mode.
1 Set [ BASIC] or [ ADVANCE] >> [
BLANK SEARCH] >> [YES].
33
28
SP 3h59m59s29f
R2:00
12:34:56AM
JAN 2 2005
To Cancel the Blank Search Function
Before Completion
Move the Joystick Control [] to select [ ].
2 Set the Mode Dial
32
to Card Recording
Mode.
3 Press the [PHOTO SHOT] Button
23
.
• The [ ] Indication lights up in red.
Recording a Still Picture on a Card
(Photoshot)
Still pictures can be recorded on the Memory Card
from the Camcorder.
32
23
Selecting the quality of Photoshot
images
1 Set [ BASIC] >> [ PICT.QUALITY] >>
[ (High Picture Quality)] or [ (Normal
Picture Quality)].
33
28
When the [ ] Indication is displayed, Progressive
Photoshot Function works. You can record still
pictures with higher quality by using this function.
• The Progressive Photoshot Function may not be
activated depending on the function you use. (p. 49)
• To record still pictures with higher quality, we
recommend setting to the Card Recording Mode.
(To activate the Progressive Photoshot Function
regardless of the function you use.)
• When you record onto the tape and the card
simultaneously, the Progressive Photoshot Function
is not activated.
Progressive Photoshot
1 Set the [OFF/ON] Switch
26
to [ON].
• The [POWER] Lamp
30
lights up.
26
30
12:34:56AM
JAN 2 2005 100
To record still pictures clearly
• When zooming in on the subject with a
magnification of 4× to 10× or higher, it is difficult
to reduce the slight hand shaking from holding the
Camcorder. We recommend decreasing the zoom
magnification and approaching the subject when
recording.
• When recording still pictures, hold the Camcorder
firmly with your hands and keep your arms
stationary at your side so as not to shake the
Camcorder.
• You can record stable pictures without hand
shaking by using a tripod.
1) Still picture size
2) Quality of still pictures
3) Number of recordable still pictures (When no
pictures can be recorded, the red light will flash.)
On-screen display in the Card
Recording Mode
1)
2) 3)
• You can also change the picture quality on [
ADVANCE] >> [
PICT. QUALITY] in the Tape
Recording Mode.
Recording with a shutter operation
effect
You can add a shutter operation simulating sound.
1 Set [ ADVANCE] >> [ SHTR EFFECT]
>> [ON].