Panasonic PV-DV203 Camcorder User Manual


 
16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1 Slide the Battery downward while
sliding BATTERY RELEASE to
remove the Battery Pack. (p. 15)
2 Insert the DC Cable into the DC IN
Terminal.
3 Connect the other end of the DC
Cable to the AC Adaptor as shown.
4 Plug in the AC Adaptor.
The POWER Lamp on the AC
Adaptor lights up.
When not in use, unplug the AC Adaptor
from the AC outlet. (AC Adaptor consumes
1 W of electric power when plugged into
an AC outlet even when not in use.)
DC Cable
(Supplied)
DC IN Terminal
Note
1
2
3
POWER
Lamp
Supplying Power
Caution:
Charge only with specified charger.
Charge the Battery within an ambient
temperature range of 10 °C (50 °F) and
30 °C (86 °F).
The Battery may be warm after charging or just
after use. This is normal.
Do not use an insufficiently charged or worn
out Battery.
If charging is done in extreme low or high
temperatures, Battery charge time increases.
Safety precautions:
Do not place the Battery near, or dispose of in fire.
Do not directly connect (short circuit) the
positive (+) and negative () terminals.
Never attempt to disassemble or reassemble
the Battery.
To avoid damage to the Battery:
Do not drop or jar the Battery.
Use the Battery with specified models only.
If the Battery is used in extremely high
temperatures, a safety device will automatically
prevent operation.
To ensure longer battery life:
While not in use, remove Battery from the
Palmcorder and AC Adaptor and store in a
cool, dark, dry place. If you leave the Battery
in the Palmcorder or on the AC Adaptor, the
Battery will no longer be rechargeable.
Keep the Battery terminals clean.
Battery Care
DC Output Connector
2
Use AC Adaptor
BATTERY
RELEASE
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information on
how to recycle this battery.
U.S.A. CONSUMERS: ATTENTION:
1
DV203.p 16-18.p65 03/01/20, 14:5516