76
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
For Windows 98SE/Me/2000 users
3 Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
•“CONNECT WITH PC” and “STORAGE” appears in the EVF or the LCD monitor.
• The “Found New Hardware” screen of Windows is displayed.
Palmcorder USB Device Driver/SD Drive
Note
• For extended use, the AC Adaptor should be used as a power source.
• Some OS, such as Windows 98SE, may
not show the icon indication that you may
safely disconnect in task tray. (OS may be
set not to show) After the [ACCESS]
display disappears from the EVF or LCD
monitor you may disconnect the USB
Cable.
To disconnect USB Cable safely (Windows Me/2000/XP)
If USB Cable is disconnected while computer is on, error message may appear. In such a
case click [OK] and close the dialog box. By following the steps you can disconnect the
cable safely.
[ This screen is an example (Windows 2000) ]
1 Double-click the icon in the task
tray.
2 Select [USB Storage Device
Controller]* and click [Stop].
3 Verify [USB Storage Device
Controller]* is selected and click
[OK].
4 Click [OK].
• You can safely disconnect the cable.
* If you are using Windows Me, [USB
Disk] will be displayed.
Note
DV203.p 75-77.p65 03/01/20, 14:5776