Filter
Top Products
10
For assistance, please call : 1-800-211-PANA(7262) or
send e -mail to : consumerproducts@panasonic.com
Insert Memory Card*
2Press LCD-OPEN Button
to unlock the LCD monitor.
Swing it fully open and
adjust the angle.
4Insert the Memory Card.
LCD Monitor
3Slide CARD EJECT Switch to open
M-CARD door.
M-CARD Door
5Close the M-CARD Door.
180°
90°
1Set POWER
Switch to OFF.
VCR
OFF
CAMERA
M-CARD
Quick Guide
Quick Guide
To Watch Playback in the LCD
(Liquid Crystal Display)
When the LCD monitor is fully open, the
Viewfinder automatically turns OFF.
180°
90°
VCR
OFF
CAMERA
M-CARD
Before you begin
• Charge the Battery. (See page 11.)
1Set POWER Switch
to VCR.
3Press REW Button to
rewind the tape.
4Press PLAY Button to
start playback.
5Press STOP Button
to stop playback.
M-CARD Lock Switch
Before you begin
• Charge the Battery. (See page 11.)
*Memory Card: MultiMediaCard or SD Memory Card (See page 64.)
• Be sure to insert the Memory Card before using the Card PhotoShot. (See page 32.)
Below is a list of memory cards which can
be used in this Palmcorder.
Memory Card
MultiMediaCard (LSFT0198A) (supplied)
MultiMediaCard (SanDisk brand)
SD Memory Card (optional) (See page 64.)
Capacity
8 MB
8 MB, 16 MB
16 MB, 32 MB, 64 MB
LOCK
SD Memory Card write protection switch
A write protection switch is located on the SD Memory Card. Sliding the
switch to the “LOCK” position prevents writing on or formatting the card.
Write protection switch
2Press LCD-OPEN Button to
unlock the LCD monitor. Swing it
fully open and adjust the angle.
201_401. 9-13.p65 01/01/18, 17:0710