Filter
Top Products
39
Special Features
Special Features
EIS ON
NORMAL
1Set POWER to CAMERA.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
CAMERA position.
2Press EIS to stabilize the picture.
• Picture flicker may be observed when
taping under fluorescent lighting
conditions.
• The EIS indicator flashes when the
light level is inadequate.
• Turn D.E.I.S. OFF during recording
when using a tripod.
3Press REC/PAUSE to start recording.
4Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
when not needed.
EIS
Dual Digital Electronic Image
Stabilization System (D.E.I.S.)
This feature helps compensate for any
unintentional hand or body movement. It
can be used in both the Recording and
Playback (VCR) modes.
CAMERA mode
VCR mode
• Other Digital Functions are turned off
automatically when the EIS and Digital
Zoom are selected.
A Set POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
B Press PLAY to start playback.
C Press EIS to stabilize the picture.
D Press EIS again to cancel.
• Be sure that D.E.I.S. is turned off
when not needed.
Note
• When using D.E.I.S in VCR mode, the
image size is slightly larger.
Note
1, A
POWER
Switch
3REC/PAUSE Button
2, 4, C, D
EIS Button
BPLAY Button
D.E.I.S. may not function when...
• Palmcorder movement is too
extreme.
• Recording a subject with distinct
horizontal or vertical stripes.
• Recording in low light situations.
• Recording a subject under a great
amount of fluorescent light.
• Recording a scene with very fast
motions.
Special Features
Special Features
201_401.39-42.p65 01/01/18, 17:0839