Filter
Top Products
26
Configure the settings relating to image quality ("Image Adjust" setup menu)
Click the [SETUP>>] button of "Image Adjust" on the [Image/Position] tab of the "Camera setup" page. (☞ page 25)
The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window.
When the values are changed, the changed values will be applied immediately to the currently displayed image on
the [Image/Position] tab.
[Super Dynamic 3]
Select "ON" or "OFF" to determine whether to turn on or
off super dynamic 3 (SUPER-D 3).
Refer to the next page for further information about
SUPER-D 3.
ON: Turn on SUPER-D 3
OFF: Turn off SUPER-D 3
Default: OFF
Note:
In the following cases, turn off SUPER-D 3.
• When flickering appears or the color changes on
the screen
• When noise appears in the brighter area on the
screen
About SUPER-D 3 (Super Dynamic function)
When there is wide variation between the illumination of light and
dark areas of the location being monitored, the camera adjusts the
lens iris in accordance with the brighter areas. This causes loss of
detail in darker areas. Conversely, adjusting the lens brightness for
the darker areas causes the brighter areas to become washed out.
SUPER-D 3 digitally combines an image that is set up for a clear
view of the brighter areas with an image that is set up for a clear
view of the darker areas, creating a final image that preserves over-
all detail.
Subject in the dark
area is hard to notice…
Subject in the bright
area is washed out…
Creates a
clearer image
by digitally
combining
images.