Filter
Top Products
28
ATW2: Auto tracing white balance under a sodium
lamp. The camera will adjust the white balance auto-
matically under a sodium lamp.
Operating color temperature range is approx.
2 000 K – 6 000 K.
AWC: Auto white balance control mode
Suitable for shooting where the light source is fixed
and the light intensity is constant. Operating color
temperature range is approx. 2 000 K – 10 000 K.
Default: ATW1
Notes:
• Under the following conditions, color may not be
faithfully processed. In these cases, select "AWC".
• When shooting a subject whose major part is a
thick color
• When shooting blue sky or sun at sunset
• When shooting a subject whose luminance is too
low
• After selecting "AWC", click the [ADJUST] but-
ton. It will take for around 7 seconds to complete
the white balance adjustment.
[Red Gain]
Adjust the red color of images.
When the cursor is moved in the "+" direction, the red
color will become thicker. When the cursor is moved in
the "–" direction, the red color will be thinner. Click the
[RESET] button to reset the color to the default.
[Blue Gain]
Adjust the blue color of images.
When the cursor is moved in the "+" direction, the blue
color will become thicker. When the cursor is moved in
the "–" direction, the blue color will be thinner. Click the
[RESET] button to reset the color to the default.
[DNR (Digital Noise Reduction)]
When this function (digital noise reduction) is active,
noise may be automatically reduced under a low lumi-
nance. Select an effect level "LOW" or "HIGH" for the
digital noise reduction.
HIGH: High DNR, afterimage remains
LOW: Low DNR, reduces afterimage
Default: HIGH
[Chroma gain level]
Adjust the chroma level (color density).
When the cursor is moved in the "+" direction, the colors
will become thicker. When the cursor is moved in the "–"
direction, the colors will be thinner.
Click the [RESET] button to reset the color to the
default.
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the
"+" direction, and will be softer when the cursor is
moved in the "–" direction.
Click the [RESET] button to reset the level to the
default.
[Pedestal level]
Adjust the black level of images by moving the cursor.
When the cursor is moved to the "+" direction, images
will become brighter. When the cursor is moved to the
"–" direction, images will be darker.
Click the [RESET] button to reset the level to the
default.
[CLOSE] button
Click this button to close the "Image Adjust" setup
menu.