Panasonic WV-NW964 Security Camera User Manual


 
59
Configure the schedule settings of the FTP periodic transmission
Click the [FTP] tab on the "Server setup" page. ( pages 4 and 5: How to display/operate the setup menu)
Schedule setup
The schedule settings of the FTP periodic transmission can be configured in this section. Refer to page 58 for further
information about the settings relating to the FTP periodic transmission.
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
The selected day of the week will be validated for the
schedule.
Step 2
To designate time, click [i] and select the desired
"hour" and "minute".
When not designating time, check the checkbox of "24
hours".
Step 3
Click the [SET] button after completing the settings.
The result will be displayed at the bottom of the win-
dow.
[Interval]
Select the interval for the FTP periodic transmission
from the following.
1 sec/2 sec/3 sec/4 sec/5 sec/6 sec/10 sec/15 sec/
20 sec/30 sec/1 min/2 min/3 min/4 min/5 min/6 min/
10 min/15 min/20 min/30 min/1 hour/1.5 hours/2 hours/
3 hours/4 hours/6 hours/12 hours/24 hours
Default: 1 sec
[Image capture size]
Select "QVGA" or "VGA" for the image capture size of
the images to be transmitted using the FTP periodic
transmission.
Default: VGA