Filter
Top Products
71
• Isn’t the SD memory card out of order?
There are limited times to overwrite on an SD memory
card. When frequently overwritten, it may be at the
end of product life. It is recommended to replace the
SD memory card.
• Is "ON" selected for "Super Dynamic 3" ?
Set to "OFF".
• When flickers appear frequently, set the shutter speed
to "AUTO" or "1/100".
• Are objects hard to focus on with the auto focus func-
tion?
Adjust the focus manually.
• Is there dust or dirt on the transparent part (over the
lens) of the dome cover (camera shell)?
Clean the transparent part of the dome cover.
Cannot adjust the focus cor-
rectly.
Installation
Guide
Reference
pages
Cause/solution
Symptom
Operation
Instructions
Flicker appears on the
screen.
26
27
• Is the SD memory card inserted correctly?
• Is the SD memory card formatted?
• Isn’t the write protect switch set to "LOCK"?
When the write protect switch is set to "LOCK", avail-
able size/total size indication of the SD memory card
will be "**********KB/**********KB".
Installation
Guide
12
–
–
Images cannot be saved on
the SD memory card.
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
Images are displayed
washed out.
Operation
Instructions
• If the camera always moves to a specific position after
turning on the power of the camera, register that posi-
tion as the home position when convenient. The cam-
era will automatically move to the registered position
using the self return function when turning on the
power of the camera.
The camera does not auto-
matically move to the previ-
ous position when turning on
the power of the camera.
23
• Is the brightness setting set at an appropriate level?
Click the [RESET] button of "BRIGHTNESS".
No image is displayed (or too
dark).
Operation
Instructions