Filter
Top Products
Repair Manual
Macro 5 SLR Camera
22
3. Set the lighten/darken buttons to the desired exposure (trim).
Notes: • Makes the picture lighter or darker to enhance the specific details
of the subject.
• Normally the camera provides the correct exposure for subjects of
average brightness.
• Each setting adjusts the flash output by 1/3 f-stop. The center
light is the nominal setting.
• White arrow lightens the picture (increases exposure).
• Black arrow darkens the picture (decreases exposure).
4. Set date/time selector buttons to the desired date/time sequence to be printed
on the picture.
Note: This function is optional. It can be shut off if desired. For detailed
information on how to select, or set, the current date/time, refer to the
Macro 5 SLR User's Guide.
Date Display: The five printable date sequences are as follows:
• No Print Mode - - -
• Month/date/year 8 7 '95
• Day/month/year 7 8 '95
• Year/month/day '95 8 7
• Day/time (24-hour clock) 7 13:30
5. Set the flash control buttons (left/right or both). The red charging status light
above the flash control button blinks while the flash units are charging. The
green status lights come on when the flash unit/s are fully charged (ready).
Note: Normally both flash units will be on. For detailed information on how to
select either the left or right flash, refer to the Macro 5 SLR User's
Guide.