Filter
Top Products
Repair Manual
Macro 5 SLR Camera
39
Left/Right Cover (Includes Front Cover)
1. Removal (Figure 5-1, 5-2 and 5-2a)
a. Turn off power by pressing the POWER button on the camera's control
panel.
b. Disconnect the camera’s power source as follows: Slide the battery cover
open, unsnap the battery cable clip, and lift out the battery holder.
c. If applicable, remove the film pack from the camera back.
d. Using a torx driver, remove the single screw securing the turret knob to
the top of the turret assembly. Lift off the turret knob.
e. Using a torx driver, remove the single screw securing the left/right covers
to the top of the turret assembly.
f. Using a torx driver, remove the three (3) screws securing the left hand
grip to the left cover. Lift off the left hand grip.
g. Using a torx driver, remove the three (3) screws securing the right hand
grip to the right cover. Lift off the right hand grip.
h. Unsnap the film door button adapter and lift it out.
i. Remove the adhesive vinyl pad from the bottom of the camera back.