Filter
Top Products
40 41
IP300 Manual
BELKIN:
1. Login router
2. Choose “Firewall”, select “Virtual Servers”
3. Input the port (except 80) and IP address, then click SAVE.
NOTE: The port and IP address should be same as camera.
Figure 7.6
SETTINGS AND SEARCHING FOR THE NETWORK PATH, ONCE IT COMES UP
YOU CAN RUN YOUR MOUSE OVER THE ICONS FOR PC AND GATEWAY TO
ASCERTAIN YOUR SYSTEM ADDRESSES.)
Set Port Forwarding in the router. It is important to set the port forwarding in
your router to the IP of your camera directly in order for the camera to work
correctly. Because there are countless routers from around the world, it is
impossible to provide a universal method of set up. The following samples
however, do provide methods for several common router systems:
TP-LINK:
1. Login the router.
2. Choose “Forwarding”, select “Virtual Servers”
3. Click the Add New Button (an example of the pop-up is below)
Figure 7.5
4. Fill in the service port (exception is 80), IP address of camera, then click SAVE.
NOTE: The port and IP address should be same as camera.
Polaroid • Settings Polaroid • Settings