Filter
Top Products
42 43
IP300 Manual
Figure 7.9
3.8 System Settings
Figure 8.0
3.8.1 Device Info
This will give information about the following: Device ID, Firmware Version,
embedded Web UI Version, Alias, Alarm Status, DDNS Status and UPnP Status.
Figure 8.1
DLINK:
1. Login the router
2. Choose “Advanced”, select “Virtual Servers”
3. Input the port, IP address, Protocol, then click SAVE.
NOTE: The public port and the private port should be the same as the camera’s
port; choose protocol to be “both”
Figure 7.7
After all steps are complete you may use DDSN freely. or check the DDNS status
from your camera and get the DDNS link for internet view. See gure below.
Steps: Login, System, Device Info in that order.
Figures 7.8
Polaroid • Settings Polaroid • Settings