Filter
Top Products
46 47
IP300 Manual
MSN Settings.
NOTE: Before setting MSN, set port forwarding (see DDNS setting instructions
for details)
Go to MSN settings Page. File in correct user name and password, add MSN
buddies, up to ten friends. Once submitted, they will appear in MSN friend’s list.
For MSN status, click on Device info.
After you run your MSN page, open chat dialog, type in the word “url”. After
several seconds you will get a reply for remote access IP address for this
particular IP camera.
3.13 Indicator Settings
Figure 8.7
You have three options for setting the pilot lamp.
1. Non-connected network out. Twinkles while connected to network and shuts
off when connection is terminated.
2. Non-connected network with more slow frequency icker. Twinkles while
connected to network and slows when connection is shut down.
3. Been extinguished. Use to keep connections OFF.
3.14 Backup and Restore
Figure 8.8
1. Back up. Back up IP Camera and all parameter settings you’ve already set by
clicking on Submit. All parameters will be stored in BIN le.
2. Restore. Restore IP Camera and all parameter settings. If you wish to change
camera settings to new status, click Browse and load new settings in BIN le,
then Submit.
Figure 8.9
Polaroid • Settings Polaroid • Settings