Filter
Top Products
56 57
IP300 Manual
Alarm Record Path. Here you may choose the le on your PC you want the
alarm messaging to go to.
NOTE: If your could not set a path using Windows 7 or Vista, take the following
steps:
First, add the IP address to the IE’s trusted sites. The steps are IE browser to Tool
to Internet Proper to Security to trusted sites to Add.
You can also run the IE as the administrator and input the IP address of camera
manually (see gure 11.1).
Figure 11.1
Sound on Alarm
Whenever motion is detected, there will be a beeping sound. Click on enable to
maintain the beep when alarm is going off or cancel it and no alarm will sound.
Record on Alarm
If you want the camera to automatically record when alarm goes off, you must
enable Record on Alarm. If you do not, you must cancel Record on Alarm.
Figure 10.6
Once an alarm has been engaged, the following will occur depending on your
settings:
Status Light turns red and keeps on blinking
If you set Sound on Alarm, alarm beeps will be audible over a speaker or
earphone attached to your computer .
If you set Record on Alarm, the camera will record the incident automatically for
60 seconds. You can then retrieve the image by going to your record folder.
If you set Sent Mail on Alarm, you’ll receive an email of event (see gure 10.0)
If you set Upload Image on Alarm, images of the incident will be sent to your
FTP server.
If the alarm goes off during time you set on the Scheduler, the camera will
automatically send emails during the time frames you selected.
NOTE: Camera record for 60 seconds once alarm is triggered.
REC Automatically and Save to PC
If you’ve enable motion detection and an event has occurred, when you open
the camera monitoring window, the recorded event will automatically be save
to your PC.
3.20 Path Settings
Figure 10.8
In gure 10.8 you will see slots to set the record path for any images being sent
to the PC from the Camera.
Record path. Set manually by clicking on record icon (SHOW REC BUTTON) to
start manual record. The le you import from your browser will automatically be
the one images are sent to.
Polaroid • Settings Polaroid • Settings