Filter
Top Products
52 53
IP300 Manual
3.18.2 Motion Detection Sensitivity.
You may choose up to 10 settings of sensitivity for motion, 10 being the most
sensitive. See gure below:
Figure 9.9
3.18.3 Alarm Input Armed/ IO Linkage on Alarm
In the event that you want to connect external alarm devices to ward off or
frighten intruders, you must choose Alarm Input Armed to enable an input
device. For an output device, you must choose IO Linkage on Alarm.
Figure 10.0
In gure 10.0 you will notice a trigger box. There are two trigger level options
you can set.
Enter Alarm Service Settings Page to set alarm to your specications.
3.18.1 Motion Detection Armed
When you enable Motion Detection Armed, the camera will sound an alarm
when motion is detected and it will record the incident.
Figure 9.7
Should motion be detected, the Alarm Status will automatically switch to Alarm
Detect Alarm.
Figure 9.8
Polaroid • Settings Polaroid • Settings