Getting Started Guide for the VSX Series
32 © Polycom, Inc.
Displaying the Far Site’s Name When the Call Connects
Depending on your system configuration, you can specify whether to display
the far site’s name when the call connects and how long to leave the name on
the screen.
To specify when to display the name of the far site:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Far Site Name Display Time, press on the remote
control, and select to display the far site’s name during the entire call, for
a specified time, or not at all.
5. Press Home to save your change and return to the home screen.
Hearing Audio Confirmation When You Dial
Depending on your system configuration, you can set up the system to speak
each number as you enter it in the dialing entry field on the Place a Call screen.
To enable audio confirmation:
1. Select System from the Place a Call screen.
2. Select User Settings from the System screen.
3. Select Next to see more settings.
4. Scroll to Keypad Audio Confirmation and press
on the remote
control to enable the option.
5. Press Home to save your change and return to the home screen.
If Keypad Audio Confirmation is on and you enter a number while in a multipoint call
hosted by one of the systems in the call, the far sites will hear the numbers as you
enter them. If you do not want the far sites to hear the numbers, mute the system's
microphone.