Filter
Top Products
PG-FP5 V2.13 PROGRAMMING GUI USAGE
R20UT2924EJ0200 Rev.2.00 Page 42 of 71
Mar 02, 2015
(b) [Standard] tab in Device Setup dialog box
On the [Standard] tab, set the programming environment of the flash memory in the target device. All basic settings to
configure the user environment and the target device can be performed. Communication channels, speeds and the
operation clock supplied to the target device vary depending on the device, so refer to the user’s manual of the target
device for setting these items.
This tab consists of the following items.
<1> [Supply voltage] area
<2> [Supply oscillator] area
<3> [Communication interface to device] area
<4> [Mode Control] area
<5> [ID code for authentication] area
<6> [Security mode] area
<7> [Command Protection] area
<8> [Option Bytes] area
<9> [Checksum type] area
Figure 1.59 Device Setup Dialog Box - [Standard] Tab
<1>
<3>
<5>
<2>
<4>
<6>
<7>
<8>
<9>