Filter
Top Products
PG-FP5 V2.13 PROGRAMMING GUI USAGE
R20UT2924EJ0200 Rev.2.00 Page 6 of 71
Mar 02, 2015
When communication is established and the programming GUI is correctly started, the main window will be opened.
Note that when the programming GUI is started for the first time, the valid programming area is cleared or once FP5
unit from a number of units has been connected, the following message will be displayed, so download the following
ESF file, PR5 file or program file. This message means that ESF file and program file in the FP5 unit and the
information stored in the programming GUI (INI file) do not match.
Figure 1.3 Message Displayed at the First Startup of Programming GUI
1. Click the OK button in the dialog box.
2. The following dialog box will be displayed. Click Yes or No .
3. Clicking Yes will open a dialog box to make a new ESF file. Refer to 1.3.3 (14) (a) <3> New... button for the
steps that follow.