Filter
Top Products
PG-FP5 V2.13 EXAMPLE OF OPERATION USING PROGRAMMING GUI
R20UT2924EJ0200 Rev.2.00 Page 59 of 71
Mar 02, 2015
<5> When the programming GUI is correctly started, the main window will be opened. The following message will be
displayed if the programming GUI is started for the first time or valid programming areas have been cleared, so click
the OK button. The Device Setup dialog box will be opened.
Figure 2.4 Message Displayed at the First Startup of Programming GUI
The following dialog box will be displayed. Click Yes or No.
Clicking Yes will open a dialog box to make a new ESF file. Refer to 1.3.3 (14) (a) <3> New... button for the steps that
follow.
Clicking ‘No’ will open a dialog box to select a previously created ESF file. Refer to 1.3.3 (14) (a) <3> ... button for
the steps that follow.