Filter
Top Products
128_ English
troubleshooting
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust
automatically.
• Set “
Focus” to “Auto.”
page 79
• The recording conditions are not suitable for auto focus.
Adjust the focus manually.
page 80
• The lens is dusty on the surface. Clear the lens and check the focus.
The image appears too bright or
flickering, or changes in color.
• This may occur when you make a recording under a fluorescent, sodium or
mercury lamp.
Cancel “iSCENE” to avoid or minimize the phenomena.
page 74
Image’s color balance is not
natural.
• White balance adjustment is required. Adjust to the proper “
White Balance.”
page 75
Playback on your DVD camcorder
Symptom Explanation/Solution
Using the playback (Play/Pause)
function does not start playing.
• Press the
MODE button to set to the Play ( ) mode.
• Images recorded using another device may not be played on your DVD camcorder.
• Select a proper storage media. (SC-DX205 only)
page 38
• Check out the memory card compatibility.
page 61
The Skip or Search function does
not work properly.
• If the temperature inside the camcorder is too high, it may not function properly.
Turn the camcorder off, and turn it on again a little later.
Connecting/Dubbing with other devices (TV, DVD players, etc)
Symptom Explanation/Solution
You cannot view the image or hear
the sound from the connected
device.
• Connect the audio of the audio/video cable to your camcorder or to the connected
device (TV, DVD recorder, etc). (Red colour- right, White colour- left)
• The connection cable (AV cable) is not connected properly. Make sure that the
connection cable is connected to the proper jack.
pages 102~103