Filter
Top Products
ENGLISH
Setting the CAM : Setting the System
9797
2
3
4
5
Setting the File No. Function
You can set the file numbers so that they reset each time Memory stick is formatted, or so that they are displayed incrementally.
1. Slide [Mode Selector] down to turn on the CAM and slide it down again.
◆ The Mode Selection screen appears.
2. Slide the [ ▲/▼ ] switch to select System Settings and press the [OK] button.
3. Slide the [ ▲/▼] switch to select <System> and press the [OK] button.
4. Slide the [ ▲/▼] switch to select <File No.> and press the [OK] button.
5. Slide the [ ▲/▼] switch to select the desired setting and press the
[OK] button.
◆ Series: Numbering is continuous between the Memory Sticks, so that the first file number
assigned on a new Memory Stick is 1 more than the last file number assigned
on the previous Memory Stick.
◆ Reset: When the Memory Stick is formatted, the file number resets to its default value.
(100-0001)
6. Press the [Back] button to finish setting.
Mode Selection
MP3
Voice Recorder
File Browser
System Settings
Back
System Settings
Date/Time
System
Display
Memory
Back
Settings: System
Beep Sound
File No.
Reset
Off
5 Minutes
Video Mode
On
Demo
Auto Shut off
Start-up
Settings: System
File No.
Series
Beep Sound
Off
5 Minutes
Video Mode
On
Demo
Auto Shut off
Start-up
Notes
✤
If you select <Back> in the menu, the previous menu appears.
✤
When you set file number to ‘Series’, each file is assigned a different number to avoid
duplication of numbers. It is convenient when you want to manage your files on a PC.