Filter
Top Products
ENGLISH
125125
Maintenance : Cleaning and Maintaining the CAM
Cleaning the Body
✤
To Clean the Exterior of the CAM
✓
To clean the exterior, use a soft dry cloth. Wipe the body gently.
Do not apply excessive force when cleaning, gently rub the surface.
✓
The LCD monitor surface should not be pressed. Use a soft dry cloth to clean the surface.
✓
To clean the lens, use an optional air blower to blow out dirt and other small objects. Do not wipe the lens with cloth
or your fingers. If necessary, use lens cleaning paper.
✓
Do not use thinner, alcohol or benzene for cleaning. Otherwise, the finish may be damaged.
✓
Cleaning should be done only after the battery pack has been removed, and other power sources have been
disconnected.
Using the Built-in Rechargeable Battery
The CAM incorporates a rechargeable lithium cell that maintains the date and other settings even when the AC adaptor
and the battery are removed. The rechargeable lithium cell is automatically recharged when the CAM is used.
✤
If The CAM is not used at all, the cell runs down in 5 days. In this case, connect the AC adaptor to the CAM
and turn on the power switch. Then leave it for 24 hours.
After that, set the date and other settings again.
Charging the Built-in Rechargeable Battery